Windows 10 can be picky with controllers. Microsoft’s operating system is, unsurprisingly, designed to work with Xbox One accessories and the Xbox Live ecosystem: It isn’t naturally suited for a Sony device, especially an outdated one. While the ScpToolkit circumvents most of the issues users may face when using the DualShock 3 on their PC, there may be errors during the installation process. Thankfully, there is a workaround to enable driver installation, should the process not go smoothly. It may be wise, however, to back up important files before proceeding, even if the procedure isn’t necessarily dangerous. You will be changing Windows startup settings, after all.
Read complete article : Apex Legends Console Commands & Controls for PC, PS4, Xbox One
Begin by pressing the Start button, or the Windows key.
Go to Settings.
Click on Update and security.
Select Recovery from the list on the left.
Click Advanced restart.
Now, wait. Your system will restart and boot in a mode that will allow you to alter your firmware and startup settings, thus allowing you to bypass the driver signature enforcement.
Select Troubleshoot from the resulting list of options.
Click Advanced settings, then Startup settings. This will initiate another restart.
After your system boots again, you will have another set of options to choose from. Find Disable driver signature enforcement, then press the F7 Key to reboot your PC one last time.
When your PC finishes rebooting, follow the procedures outlined above to reinstall and configure Scptoolkit.
Read complete article : Apex Legends Console Commands & Controls for PC, PS4, Xbox One
Begin by pressing the Start button, or the Windows key.
Go to Settings.
Click on Update and security.
Select Recovery from the list on the left.
Click Advanced restart.
Now, wait. Your system will restart and boot in a mode that will allow you to alter your firmware and startup settings, thus allowing you to bypass the driver signature enforcement.
Select Troubleshoot from the resulting list of options.
Click Advanced settings, then Startup settings. This will initiate another restart.
After your system boots again, you will have another set of options to choose from. Find Disable driver signature enforcement, then press the F7 Key to reboot your PC one last time.
When your PC finishes rebooting, follow the procedures outlined above to reinstall and configure Scptoolkit.
No comments:
Post a Comment